Intervalometer
The time, after which the camera takes a picture, is set by means of selection switches. The mechanical selection switches serve also as an indicator, with zero current consumption. The interval time can be changed at any time, also when the device is in operation. A rotary switch is used for selecting whether 1 to 4 frames will be taken at a time or will the camera operate for a defined time period (holding time).
Many alternative control signals can be selected for different camera types. For taking single frames, the camera must have a single shot function. The holding time and the control signal alternative are programmed by setting a numerical code to the time selection switches and then switching on the power, when the information is stored in the memory (for more information please see the operating manual).
Technical Data
Casing made of aluminium. Dimensions w/o switches and connectors, mm: width 107, depth 116, height 34.
Takes 1 to 4 frames at a time, or keeps the camera operating continuously (bulb exposure or sequence shooting) for a programmed time period.
The interval time adjustable in one second steps between 1 s and 99 h 59 min 59 s.
The holding time adjustable in one second steps between 1 s and 9 min 59 s.
Adjustable pulse duration for a single shot: 13, 100, 250 or 500 ms.
In the timer function, the time is adjustable in one second steps between 1 s and 99 h 59 min 59 s.
Operating voltage 8...24 VDC.
Current consumption with battery power during an interval 4 mA.
Memory back-up function in the case of power failure. The battery can also be hot-swapped during shooting.
Durable construction.
Operating temperature range -20...+70 °C.
Works with 16 and 35 mm movie cameras equipped with a single shot function: e.g. AATON, IKONOSKOP A-Cam and BOLEX H16 EL.
Works with NIKON and CANON EOS digital still cameras.
Can be used for controlling NIKON still cameras equipped with an infrared control feature. The control signal emulates Nikon ML-L1 and ML-L3 remote controllers.
Can be connected to super-8 cameras equipped with a single shot interface.
Even though video cameras offer limited features for taking single shots, the timer and hold functions can be used with video cameras, too. Can be connected to cameras with a Control-L (LANC®) interface and to Panasonic video cameras with a 2.5 mm remote control connector.
Also other camera types may be useable with a suitable adapter cable. Please ask for further information, if a suitable cable is not found in the table.
